RoweTech Launches SeaSEVEN ADCP
Image: RoweTech
In 1770, Ben Franklin drew the first map of the Gulf Stream. In 1903, Scripps Institution of Oceanography was founded and Swedish inventor Vagin Ekman invented the mechanical flow meter for measuring ocean and river currents. In 1914, the first acoustic depth measurements were made. This technology remained unchanged until 1982 when the Acoustic Doppler Current Profiler (ADCP) was invented by Fran Rowe and Kent Dienes.
Through the years improvements included broadband measurements, multi modes, bottom track and commercialization of the technologies. Many uses for ADCP current measurements have been developed in the past 30-plus years. Today, there are several manufacturers using this technology.
In 2010, Fran Rowe founded RoweTech and leads the company that is developing the next generation of Doppler measurement tools.
RoweTech has now designed a new ADCP that contains the features of RoweTech’s dual frequency ADCP and its wave measurement ADCP SeaWAVE. Additionally, this new product named SeaSEVEN has all the features of RoweTech’s standard ADCP’s, which include 24-bit front end A/D converter, multi-mode and multi-missions, high ping rates, high capacity data storage and high speed serial and Ethernet data comms interface. These standard ADCP features allow total control over each beam, beam pair, Janus beams and 3-D profiling.
RoweTech's new product has two pairs of three beams splayed around the vertical beam. It has 60º azimuths between the beams and a 20º elevation, which allows the SeaSEVEN to make measurements never before available from a traditional three, four or five beam current profiler. SeaSEVEN is also able to make the basic measurements of Doppler shift, echo intensity, correlation, depth and temperature at a high speed [10+ Hz] and store it on up to 64 GByte of memory. Researchers now have the ability to achieve applications which have been difficult or impossible with standard ADCPs.
RoweTech has launched the SeaSEVEN research-grade Doppler profiler and identified seven applications that are much easier to accomplish using this new ADCP.
According to RoweTech , the seven new applications for the SeaSEVEN ADCP include:
- Waves: Wave measurements can be accomplished in coastal waters using the vertical beam for direct surface height measurements and with a pressure sensor, both sampled at 2 Hz.
- Turbulence: High data rates and small bins allow the high temporal and spatial measurements needed for calculating turbulence.
- Renewable energy: Use as both a vessel-mounted, buoy-mounted, or bottom-mounted platform allows SeaSEVEN to be used as a site selection, resource measurement, environmental monitoring, or turbine wake characterization tool.
- Bottom Boundary Layer: With a low profile, short blank, high resolution, high ping rate BBL measurements can be achieved.
- Sediment Transport/Scour: High resolution echo intensity, echo sounder function combined with dual frequency profiles makes the SeaSEVEN an excellent measurement tool.
- Reynolds Stress: High ping rate and fine resolution in space and time provide data used in Reynold's Stress measurements.
- Tidal Measurements: With a high resolution surface track/echo sounder measurement, and high resolution current profiles, tidal measurements can be made from either a surface or bottom-mounted ADCP.
February 2024
