welding/pipeline/piping/NDT/Certifying Authority

Job Category: Project Engineering / Project Management

Description

POSITION : Engineering Inspector

DATE OF BIRTH : 13 march, 1971

MARITAL STATUS : Married

NATIONALITY : Malaysian

LANGUAGES : Malay and English

COMPUTER LITERACY : Good

QUALIFICATION : 1) Diploma in Mechanical Engineering

2) Certificate in Marine Engineering

3) PCN Level 2 in Welding Inspection and Radiographic

Interpretation (PCN NUMBER: 301756)

4) Offshore Safety training - BOSET (cert no: M-B233176/13)

SUMMARY OF EXPERIENCE

More than 20 years’ working experience in such as Supervisor. Certifying Authority, Resident inspector, Vendor/shop inspector, HVAC Inspector, Piping and Structural Welding Inspector, NDE coordinator, Pipeline Inspector, Material Inspector, Civil & Track Work Inspector, Turnaround inspector, NDT Technician Operator and Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project, Ship Repair and general industries.

COURSE ATTENDED

May 2013 : BOSET Offshore Training

SEQU, Kuala Lumpur.

Nov 2011 : CSWIP 3.1 –Welding Inspector

July 2010 : API 510 – Pressure Vessel

MINDT, Kuala Lumpur.

November 2009 : PCN level 2 in Ultrasonic Testing

MINDT, Kuala Lumpur.

January 2008 : PCN Level 2 in Radiography Interpretation

MINDT, Kuala Lumpur.

July 2006 : Incident Investigation course

Conduct by Risk GlobalTechnologies S/B, Kuala Lumpur,Malaysia

June 2006 : Basic Offshore safety, Sea survival and helicopter underwater

Escape training, basic firefighting, first aid CPR/EAR.

Offshore safety Sdn.Bhd. Kuala Lumpur, Malaysia

May 2001 : Construction Industry Development Board Malaysia (CIDB)

Supervisor for Mechanical Works

August 2000 : Welding Inspector – CSWIP 3.1

Ruane& T.P O’neill . TATI Terengganu, Malaysia

Sept 1994 : Magnetic ParticalInspection Course

Organised by Mr. SaharuddinKambari

NDT Level III from NDE Consultancy Services

June 1994 : Total Quality Management (TQM)

Conducted By Mr. Azaddin Aziz

QA/QC Manager

SimeSembawang Engineering S/B, PasirGudangJohor.Malaysia

Nov 1993 : In House Training – ASNT Level II

MPI and DPI

SimeSembawang Engineering S/B, PasirGudang, Johor, Malaysia

RESUME OF POSITIONS HELD

Dec 2014 to August 2015 : Technip Far East (M) Sdn. Bhd.

Kuala Lumpur, Malaysia.

Position : Resident Inspector

- EEW (M) Sdn. Bhd. Tanjung Langsat, Johor.

- Dynac (M) Sdn. Bhd. Tanjung Langsat, Johor

Project : Maharaja Lela South Project

Total E&P Borneo BV

Brunei Darul Salam

Job Scope:

Monitor fabrication of steel pipe longitudinal SAW at EEW Malaysia and fabirication of 2 unit Air Cooler at Dynac (M) Sdn Bhd.

Verify, witness and or perform specific activities, at Suppliers' facilities, performed at intervals consistent with the importance of the item and service being furnished. These source surveillances shall be conducted in accordance with plans to perform inspections, examinations or tests at predetermined points. In addition, will provide documented evidence of acceptance to the customer.

The primary function of the Resident Inspector is to ascertain through proper examination and various tests that material and/or equipment conforms to requirements.

To perform inspection and issued certification works such as welding inspection, verification of materials handling and materials verification, dimensional and fit-up & visual verification, manual ultrasonic testing (UT), automatic ultrasonic testing (AUT), Digital Radiography testing (DRT), Radiography Testing (RT). Reviewed result and verification of work as in accordance with project specification requirement, approved procedures and related company work instructions.
Witness - The act of observing and giving an account of inspections and/or tests performed by others. Typical Items Witnessed - Functional testing, hydrostatic testing, nondestructive testing, and other special tests.
Verify - The act of proving that a function or requirement has been met by examining objective evidence. This evidence can be in the form of documentation or confirmed by witnessing or performing a function.

Typical Items Verified - QA/QC program implementation, welding procedures/qualification records, inspection/test procedures, installation procedures, and material certifications.

Perform - Personal performance of a task or function.

Typical Items Performed - Visual inspections, dimensional inspections, document review, shipping release inspection.

Julai 2014 to Nov 2014 : DNV Germanischer Lloyd (M) Sdn. Bhd.

Kuala Lumpur, Malaysia.

Position : Certified Authority (CA)

Project : EPCIC of JDA Gas Balancing Evacuation (EVA) Project

Malaysia-Thailand Offshore (24” X 75.148km)

Job Scope:

Monitoring welding and NDT activities, Installation, cleaning, Testing, and pre-commissioning 0f 24” X 75.148km Offshore Pipe-Laying at Malaysia-Thailand Joint Development Area (JDA).

Review of Procedures and ITPs to be AFC and latest revision.

Review of Welders Qualification Records. NDT procedures and technicians’ resumes. NDT equipment and calibration certs. mill Certificates for pipes, welding equipment and consumables.

Monitor the wrapping and coating activities of weld joints.

Witness the pressure test carried out on tie-in spools and pipeline.

Witness of pigging operations. Buckle detector and gauge plate conditions, installation on tie-in spools.

Review and endorse of inspection reports.

Jan 2014 to April 2014 : Sabah Shell Petroleum Company Limited.

Sabah, Malaysia.

Position : Senior Material Inspector (Welding and Mechanical)

Project : Gemusut Kakap FPS Project.

Onshore Labuan Base

Job Scope:

Monitoring during the fabrication on yard onshore Structural, Piping/Exotic Materials (Duplex, Stainless Steel, Cooper Nickel, Titanium), mechanical equipment, blasting & painting / coating and offshore hook-up & commissioning for pending activities piping works and mechanical works on yard fabrication to follow-up, installation of subsea pipelines in accordance with project specification requirement, approved procedures and related company work instructions.

Familiarize with applicable shell material specifications, drawing & international codes and standards.

Review, check and confirm traceability of material certificates and documentations to ensure compliance with

Shell specifications’, Malaysian and International Standards.

Confirm correct material inspection certificate that is consistent with Shell DEP requirementsor applicable

contractual requirements.

Liaise with the contractor/ company’s material group regarding non-compliance, disposal, identification,

and preservation.

Verify contractor material control activities such as receiving, storing, preservation, issuing and comply with

the procedure and requirements. Ensure all records are kept and verified to ensure retrieve ability of

information regarding material.

Inspect and confirm that ship loose items shall be physically inspected to be consistent with ship loose

packing list.

Verify surplus material are properly identified, stored and preserved for the purpose of handover at the

completion of the project.

Witness mechanical and equipment testing at fabrication Workshop.

June 2013 to Dec 2013 : Sabah Shell Petroleum Company Limited.

Sabah, Malaysia.

Position : Senior Inspector

Project : Gemusut Kakap FPS Project.

Offshore Installation Team. (HUC)

Job Scope:

Monitoring and witness of installation Gemusut kakap FPS and subsea flexible hose.

Verify strict compliance with the specified requirements.

Ensure that company HSE&Q policies and procedure are adhered to in all phase of work.

Review work scopes, specification and work procedure to determine the inspection, testing and procedural

requirements.

Perform witness and hold point inspections in accordance with the approved ITP.

Report Non-conformities and improvement areas and notify the construction Superintendent and Quality

Control Coordinator.

Verify through surveillance activities and attending witness and hold inspection points.

Produce a daily surveillance report and to summarize all tasks undertaken and the status of any work found

to be unsatisfactory.

May 2011 to May 2013 : Petrofac (Malaysia-PM304) Limited.

Kuala Lumpur, Malaysia.

Position : Piping and Mechanical Inspector

Project : FPSO Cendor Phase 2 Project. (Conversion Project)

Malaysia Marine and Heavy Engineering Sdn. Bhd.

Pasir Gudang, Johor. Malaysia.

Job Scope:

Monitoring progress demolition of existing piping system,

Monitoring progress installation of FPSO accommodation piping system

Review all procedures and assist in approval.

Ensure key dates are achieved for preparation and submission(where appropriate) of quality Procedure, inspection and test plans and QA activities.

Witness WQT and monitor fabrication activities and quality of work compliances to project Requirements.

Review electrode selection, storage and maintenance.

To ensure that all red line mark ups indicating site amendments, deviations are incorporated in the final as built revision drawings and P&ID drawings.

Monitoring of contractor during welding i.e. approved welders, parameter, inter pass temp etc.

Material receipt inspection and verification.

Monitor timelines of incoming test report and liaise with the relevant batch plants, Suppliers and labs to ensure report are being received on time.

To ensure and monitor fabrication activities and quality of work compliances to project requirements.

Ensure WPS conformity, dimensions, joint preparations, alignment, welding Parameters, bolting, threading, supports, PWHT and etc.

Coordination of contractor activities and liaison with other Company personnel (logistics, QC, engineering, etc.)

Monitor construction activities and ensure these are executed in accordance to project budget and schedule, highlighting deviations and suggesting possible solutions.

Monitor EPCC workmanship to ensure compliance with specification and procedure.

Determine base materials and consumable welding material conform to the specification and that Welding filler metals used are as specified for material.

Coordinate the internal project quality activities within Petrofac and the external activities between contractors and suppliers.

June 2010 to May 2011 : Bureau Veritas (M) Sdn. Bhd.

Kuala Lumpur, Malaysia.

Position : Surveyor/Source Inspector

Project : 04 Well Head Platforms for MHN Re-Development Project.

Oil and Natural Gas Corporation Limited (ONGC)

: B-193 Well Head Platform (Topside and jacket)

Oil and Natural Gas Corporation Limited (ONGC)

: Monitoring fabrication of Sub-Sea Flexible Pipe

Asiaflex Product Sdn. Bhd. Tanjung Langsat, Johor.

Job Scope:

The role of the Source Surveillance (Shop) Inspector is to verify, witness and or perform specific activities, at Suppliers' facilities, performed at intervals consistent with the importance of the item and service being furnished. These source surveillances shall be conducted in accordance with plans to perform inspections, examinations or tests at predetermined points. In addition, will provide documented evidence of acceptance to the customer.

Reviewing and approved the Project Specification, Design Calculations, Welding Inspection & Testing requirements based on the applicable codes like API 17J Specification for Unbounded Flexible Pipe, Third Edition (ISO 13628-2:2006,Identical), Includes Errata 1 & 2 (2009 and 2010).

The primary function of the Source Inspector is to ascertain through proper examination and various tests that material and/or equipment conforms to requirements of:

Review the Purchase Order. Manufacturer's Approved Drawings, Supplier Procedures
Witness mechanical testing at PTS Lab in Gelang, Johor, Singapore and Batam, Indonesia.
Review Welding Procedure and Nondestructive Examination (NDE) Procedures
Familiar with Welding Process (SMAW, GTAW, SAW, FCAW)

Feb 2010 to May 2010 : Germanischer Lloyd (M) Sdn. Bhd.

(GL Noble Denton)

Kuala Lumpur, Malaysia.

Position : Senior Pipeline Inspector (Offshore)

(Third Party Inspector)

Project : Ceylon Petroleum Storage Terminal Ltd.

Muthurajawela SPBM and Second Offshore Pipeline Project.

Colombo, Sri Lanka.

Job Scope:

Monitoring welding and NDT activities, Installation, cleaning, Testing, and pre-commissioning

of new CALM type SPBM (Dual path) and 18” Subsea Oil Pipeline including connection to existing PLEM

and Anchoring system, provision of new PLEM (single path), floating and Subsea hoses.

Review of Procedures and ITPs to be AFC and latest revision.

Review of Welders Qualification Records.

Witness any Welder Qualification Tests.

Check welding equipment and consumables.

Review of NDT procedures and technicians’ resumes.

Check NDT equipment and calibration certs.

Review QC procedures and resumes.

Check QC equipment to be used during inspection.

Monitoring of welding activity and performance.

Review or witness of NDT activity and performance as required.

Monitor the wrapping and coating activities of weld joints.

Witness the pressure test carried out on tie-in spools and pipeline.

Review Mill Certificates for pipes.

Monitor of pipe book and pipeline post trench.

Witness of pigging operations. Buckle detector and gauge plate conditions.

Witness of pressure test.

Witness installation on tie-in spools.

Review and endorse of inspection reports.

Feb 2008 to November 2009 : Woodside Burrup Pty. Ltd.

Perth, Australia.

Position : NDE Coordinator/Checker

Project : Pluto-A LNG Development Project (Topside)

Ramunia International Services Limited.

Pengerang, Johor, Malaysia.

Job Scope:

Monitoring fabrication, welding and NDT activities as per contract requirement.(structural and piping)

Review all NDT procedures and assist in approval.

Ensure NDT operators are qualified, certified and competent to do the job.

Ensure the equipment is suitable for the job, calibrated and good condition.

Monitor the performance of NDT activities including interpretation of results.

Random Ultrasonic cross checking at the weld joints.

Verify NDT works by audit if required.

Ensure NDT records including radiographic films are properly kept, maintained, packed and easily retrievable.

Ensure that NDT contractors comply to the safety requirement during the transportation, storage and use of radioactive sources.

Ensure results of NDT are correct and satisfy the acceptance level of work requirement.

Participate in the resolution of the quality problems as directed by QAQC lead.

Witness Welder Qualification Test (WQT) and WPQT.

Witness and verification mechanical testing.

Monitoring pile cans fabrication and SAW welding and activities at PT. DSAW Yard. Batam, Indonesia.

Material receiving inspection and verification.

Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.

Report to the QAQC Lead for area assignment.

To monitor weld summary record and compile for the final documentations.

May 2007 to Dec 2007 : Newfield Peninsula Malaysia Inc.

Kuala Lumpur, Malaysia.

Position : Structural and HVAC Inspector

Project : East Belumut-A (Topside, Living Quarters)

Ramunia Fabricators Sdn. Bhd.

Pengerang, Johor, Malaysia

Job Scope:

Monitoring fabrication, welding and NDT activities as per contract requirement.

Coordinate closely with contractor to minimize work interference due to testing or procedure qualification requirements.

Interpret results of radiography and other NDT methods.

Witness Welder Qualification Test (WQT) and WPQT.

Material receiving inspection and verification.

Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.

Report to the Client Site Representative (CSR) for area assignment.

To monitor weld summary record and compile for the final documentations

Monitor tie-down jobs during load-out activities

March 2007 : DMS (Asia) Sdn. Bhd.

Kuala Lumpur, Malaysia.

Position : Welding Pipeline Inspector (Offshore)

Project : Diversion of Submarine pipeline between Pasir Panjang & Pulau Bukom,

Job Scope:

Act on behalf of DMS (Asia) as site representative for:

- Inspection and reporting Welder Qualification testing in accordance with API 1104 and project requirements.

- Witness welding procedure qualification and testing in accordance with project specifications.

- Material receiving inspection and verification.

- Verify and record inspections and testing during pipe lay activities in accordance with project ITP and procedures.

- Review NDT results (RT, UT, MT & PT)

Jun 2006 to Jan 2007 : Carigali Hess Operating Company Sdn. Bhd.

Kuala Lumpur, Malaysia.

Position : Structural Welding Inspector

Project : Brown field Construction (Fast Track Project)

Cakerawala Gas field Development Phase 2

KHL yard, Lumut, Perak, Malaysia

Job Scope:

Monitoring fabrication, welding and NDT activities as per contract requirement.

Coordinate closely with contractor to minimize work interference due to testing or procedure qualification requirements.

Interpret results of radiography and other NDT methods.

Witness Welder Qualification Test (WQT) and WPQT.

Material receiving inspection and verification.

Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.

Report to the Client Site Representative (CSR) for area assignment.

To monitor weld summary record and compile for the final documentations

Monitor tie-down jobs during load-out activities

Nov 2004 to May 2006 : OGP Technical Services Sdn. Bhd.

(A Member of PETRONAS Group of Companies)

Kuala Lumpur, Malaysia.

Client : Petrodar Operating Company (PDOC)

Republic of Sudan, Africa

Position : Welding Technical Inspector (Tanks, Pipeline, Piping/Mechanical)

(Project management Consultant)

Project : Central Processing Facilities (CPF)

Al-Jabalayn site

MELUT Basin Oil Development Project

Block 3&7 (Upstream)

Republic of Sudan, Africa

Job Scope:

Monitoring all welding and NDT activities as per contract requirement (Piping/Mechanical, Tanks. Pipeline)

Coordinate closely with contractor to minimise work interference due to testing or procedure qualification requirements.

Interpret results of radiography and other NDT methods.

Witness Welder Qualification Test (WQT) and WPQT.

Material receiving inspection and verification.

Monitoring contractor work activities to ensure all works are

performed in accordance with the specification and procedure.

Material receiving inspection and verification.

Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.

Line check and prepared final punch list.

Report to the site manager for area assignment

Dec 2003 to Nov 2004 : Sime Darby Engineering Sdn. Bhd.

PasirGudang, Johor, Malaysia

Position : Structural Welding Inspector

Project : Talisman Energy

East Bunga Raya BR-E CO2 PLATFORM.

: West Africa Field Development FPSO Project

MODEC International LLC. Singapore.

(Fast Track Project)

Scope of Work : Liase with client representative and PMT on matter related

to quality.

Perform Inspection as per ITP.

Monitor of all welding activities during fabrications

Request NDT on Complete joint as per contract requirement

To monitor weld summary record and compile for the final

Monitor tie-down jobs during load-out activities.

August 2003 to November 2003 : K & K SepaduSdn. Bhd.

Petaling Jaya, Selangor, Malaysia

Client : Gas Malaysia Sdn. Bhd.(GMSB)

Position : Pipeline QC Supervisor

Project : EPCC of NGDS to Super Food Technology

Mukim Plentong, Masai, Johor, Malaysia

Job Scope:

Coordination of contractor activities and liaison with other Company personnel (logistics, QC, engineering, etc.)

Monitor compliance of pipeline works with approved schedule and budget.

Validate work progress.

Ensure technical integrity of pipeline works according to contract scope of work and in compliance with Company standards and Local regulations.

Ensure Pipeline construction, coating and hydro testing activities are performed in compliance with approved project specification, international standards and codes.

Supervise company staff, inspectors and construction contractor.

Ensure effective material handling and control.

Works progress certification.

Monitor construction activities and ensure these are executed in accordance to project budget and schedule, highlighting deviations and suggesting possible solutions.

Coordinate interfaces with the Company Commissioning Team.

Ensure the application of Local and Company HSE standards and policies.

July 2002 to July 2003 : Sime Darby Engineering Sdn. Bhd.

Pasir Gudang, Johor, Malaysia

Position : Structural Welding Inspector

Project : PetronasCarigaliSdn. Bhd.

Angsi C & E Topside and Jacket

(Fast track Project)

: Sarawak Shell Berhad (SSB)

B11DR-A Jacket

Job Scope:

Liase with client representative and PMT on matter related to quality.

Perform Inspection as per ITP.

Monitor of all welding activities during fabrications

Request NDT on Complete joint as per contract requirement

To monitor weld summary record and compile for the final Documentations

Review NDT results (RT, UT, PT & MT)

Monitor tie-down jobs during load-out activities

Feb 2002 to May 2002 :Yongchan Jaya Engineering Sdn.Bhd.

Johor Bahru, Johor, Malaysia

Position : Construction Supervisor (Piping and Mechanical)

Project : Gadong Power Station,

Brunei Darussalam

Client : Shinwa Corporation Pte. Ltd. Japan

Job Scope:

Coordination of contractor activities and liaison with other Company personnel (logistics, QC, engineering, etc.)

Monitor compliance of pipeline works with approved schedule and budget.

Validate work progress.

Ensure technical integrity of pipeline works according to contract scope of work and in compliance with Company standards and Local regulations.

Ensure Pipeline construction, coating and hydro testing activities are performed in compliance with approved project specification, international standards and codes.

Supervise company staff, inspectors and construction contractor.

Ensure effective material handling and control.

Works progress certification.

Monitor construction activities and ensure these are executed in accordance to project budget and schedule, highlighting deviations and suggesting possible solutions.

Coordinate interfaces with the Company Commissioning Team.

Ensure the application of Local and Company HSE standards and policies.

April 2001 to August 2001 :Alstom Power Sdn. Bhd.

Petaling Jaya, Selangor, Malaysia

Position : Piping and Mechanical Inspector

Project : 3 x 700 MW Combined Cycle Power Plant

Manjung Power Station, Perak, Malaysia

Job Scope:

Inspection of all fit-up and visual during pre- fabrication and installation.

Perform Welder Qualification Test (WQT).

Review NDT report before submit to client for endorsement.

Perform line check together with client and sub-Contractor for any rectification.

Prepared final punch list.

To monitor coating work for underground pipe line (fresh water)

To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation.

Sept 2000 to Feb 2001 : Amerstrand Engineering Sdn. Bhd.

c/o SIME Darby Engineering Sdn. Bhd.

Pasir Gudang, Johor, Malaysia

Position : QC / QC Coordinator – Piping and Mechanical

Project : Petronas Carigali Sdn. Bhd.

Angsi- A Topside

Job Scope:

Arrange subordinate to do the job as per client request.

Inspection of all fit-up and visual during pre- fabrication and installation.

Perform line check together with client and sub-Contractor for any rectification.

Prepared final punch list.

To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation

Dec 1999 to May 2000 : Malaysia Shipyard and Engineering Sdn. Bhd.

Pasir Gudang, Johor, Malaysia

Position : QC Inspector – Structural & GRE Piping

Project : PetronasCarigaliSdn. Bhd.

ANDR-A Topside and Jacket.

Job Scope:

Inspection of all fit-up and visual during pre-fabrication and installations

Liase with client representative and PMT on matter related to quality.

Perform Inspection as per ITP.

Monitor of all welding activities during fabrications

Perform line check together with client and sub-contractor for any rectification.

Prepared final punch list.

To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation.

March 1999 to July 1999 : Penang Shipbuilding and Construction Sdn.Bhd

Kemaman Supply Base (KSB) Kemaman,Terenganu, Malaysia

Position : QC Inspector – Piping and Mechanical

Project : Esso Production Malaysia Inc (EPMI)

GUD-12 Angsi Host Tie-in and Tabu-11 Gas Injection

Job Scope:

Conduct welder qualification test, prepare welder certificate,

carry out material inspection, material verification, fit-up inspection, visual inspection, request NDT, interpret RT result,

Prepare hydro test report, prepare welding summary and prepare manufacturing data report.

June 1998 to Feb 1999 : Gunawan Iron & Steel SdnBhd

Phase 2 Project

Kemaman, Terenganu, Malaysia

Position : Piping and mechanical Supervisor

Power Station Department

Job Scope:

Monitor compliance of pipeline works with approved schedule and budget.

Validate work progress.

Ensure technical integrity of pipeline works according to contract scope of work and in compliance with Company standards and Local regulations.

Ensure Pipeline construction, coating and hydro testing activities are performed in compliance with approved project specification, international standards and codes.

Supervise company staff, inspectors and construction contractor.

Ensure effective material handling and control.

Works progress certification.

Monitor construction activities and ensure these are executed in accordance to project budget and schedule, highlighting deviations and suggesting possible solutions.

Coordinate interfaces with the Company Commissioning Team.

Ensure the application of Local and Company HSE standards and policies.

June 1996 to May 1998 : Time Salam Lavalin Construction J.V.

Selangor, Malaysia

Project : PUTRA-KLRT System 2 (for Kuala Lumpur, Malaysia)

Position : QC Inspector (Track Work, Civil & Welding)

Job Scope:

: 1) Checking concrete work as per Stated below:

- Slump Test

- Pressure Test

- Dial Gauge Test

- Sieve Analysis & Moisture Analysis

- Checking & Supervising casting Concrete Operation

- Checking as built thickness of panel according to drawing and cut sheet

- Filing report and submit to QC Manager.

2) Track works as per stated below:

- Study drawing, specification and procedure of works.

- To observe and witness with format sheet for operation progress as per stated below:

- Assembly and placement of turn out

- Assembly and installation special track work (cross over) tie placement and spacing rail installation flash butt welding

- Thermite welding bonded joints distressingoperation linear induction module installation

- Power rail study and power rail installation

- Cable trench installation

- Fine tuning track

- filing report and submit to QC Manager

3) Cut & Cover Work (tunnel section) as per stated below:

- Inspection of Bored Pile with 600 mm, 800 mm & 1200 mm of diameter.

- Checking reinforcement before installation

- Checking concrete before pouring.

- Inspection of Starter Bars:

- measured and make sure length of the starterbars as in order refer to the drawing.

- Checking the reinforcement for base slab before concreting

- Dealing with sub-contractor & consultant.

- Reporting to QC Manager & Consultant.

December 1994 to May 1996 :Teknispek Sdn Bhd

Kuala Lumpur, Malaysia

Position : NDT Technician

ASNT level 2 – MT,PT,UT,RT.

Project : Esso Production Malaysia Inc (EPMI)

Offshore and Onshore

Job Scope:

: To carry out Magnetic Partical Inspection and Dye Penetrant Inspection and Radiography Testing.

: Thickness measurement of material.

: Job including reporting and documentation as per client requirement.

: Shutdown job.

Nov 1993-Nov 1994 :Sime Darby Engineering Sdn.Bhd

Pasir Gudang, Johor, Malaysia

Position : NDT Technician

ASNT Level 2

Project : Esso Production Malaysia Inc (EPMI)

Jerneh ‘A’

Guntong ‘D’

- Sarawak SheelBerhad (SSB)

- M 1 Living Quarters

- M 3 Living Quarters

- M3PQ-A Integrated Production Module

- TenagaNasionalBerhad (TNB)

Job Scope

: Performed MPI on various type of structure.

Performed MPI and DPI on piping with various type of material.

July 1992-Nov 1993 : Malaysian Shipyard and Engineering Sdn. Bhd.

Pasir Gudang, Johor, Malaysia

Position : Machinery Fitter

Performed – Overall Ship Maintenance.

Repairing for diesel main engine and accessories.

Repairing for diesel generator engine and accessories.

Repairing and alignment for shafting and propeller.

Repairing and alignment for turbo charger turbine engine.

Repairing for anchor winch.

Repairing for marine gearbox and marine clutch.

Repairing and alignment for electrical pump and centrifugal pump.

Repairing for hydraulic and pneumatic system.

Repairing many type of valves.

Repairing for bow trustier at marine container ship.

Sea-trial.

Turn Around / Shut Down Jobs

The main Purpose of the inspection is to make the professional judgments about the integrity of the equipment inspected. Various type of the equipment being checked thus air-fin cooler, column, vessel, heat exchanger, damper and etc. The condition and recommendation of the items inspected then being compiled and submitted to owner for further action. All items inspected by DOSH officer as a final acceptance.