New Wave Media

June 16, 2016

Fiber-rope Retrofit Extends Subsea Crane Capabilities

MacGregor, part of Cargotec, has launched a fiber-rope retrofit option for its subsea cranes; the modular upgrade replaces the crane's original steel wire rope with synthetic fiber rope, using the same technology as MacGregor’s fiber-rope crane, the FiberTrac 1500, introduced earlier this year.

These cranes combine MacGregor's offshore crane technology with the fiber-rope tensioning technology perfected by Parkburn Precision Handling Systems.

According to MacGregor, fiber rope’s advantage when used in this context is that it weighs virtually nothing in water, so regardless of the length of rope paid out; it does not add anything to the load experienced by the crane. This is in complete contrast to wire rope, where the increasing weight of wire paid out progressively and seriously limits the load permissible in relation to depth.

Gaute Sjusdal, Director of Advanced Offshore Solutions, Global Lifecycle Support at MacGregor, explained, “By employing this fiber-rope technology, a crane is able to use its full lifting capacity at maximum depths, so a smaller crane and vessel can be used for more assignments. The fiber rope crane can lift loads at practically any depth that is required, allowing these vessels to bid on a wider range of contracts.”

Effectively, a 100-metric-ton fiber-rope crane has the same lifting capacity as a 150-metric-ton crane with steel wire rope, lifting at a depth of 2,000 meters; a 200-metric-ton crane with steel wire rope, lifting at a depth of 3,000 meters; or a 250-metric-ton crane with steel wire rope, lifting at a depth of 3,500 meters.

Additionally, the retrofit system is designed in modules for rapid installation, MacGregor said. It includes a deep water capstan traction device, delivered in partnership with Parkburn Precision Handling Systems, which replaces the crane’s original main winch and overcomes the problems traditionally associated with handling fiber rope. The system also includes a low tension fiber-rope storage drum.

The fiber rope can be inspected for wear, internally and externally. The ability to splice in new sections adds flexibility to the system. “While the entire rope can be replaced if necessary, damaged sections can easily be replaced and the length can be increased as required,” Sjusdal said. “Transportation is simple and requires no special equipment. In contrast, 3,000 meters of steel wire rope poses some significant challenges and has special transportation, handling and spooling requirements. With its low weight, a synthetic fiber rope can be shipped in a normal container; there is no need for a drum. Also unlike wire rope, fiber rope does not require lubrication, eliminating a source of pollution.”

“The crane will be continuously connected to a monitoring system, which delivers real-time data used to detect conditions that could lead to a breakdown. We will distribute operational parameters to our customers, to ensure that the equipment works to its best potential,” Sjusdal noted.

Cargotecsame technologysteel wire rope
Marine Technology Magazine Cover Nov 2020 -

Marine Technology Reporter is the world's largest audited subsea industry publication serving the offshore energy, subsea defense and scientific communities.

Marine Technology ENews subscription

Marine Technology ENews is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

Subscribe for MTR E-news