Wednesday, August 10, 2022
New Wave Media

August 14, 2013

Fugro Chance Tackles Noisy Acoustic Metrology Project

  • Photo: Fugro Chance
  • Photo: Fugro Chance
  • Photo: Fugro Chance Photo: Fugro Chance
  • Photo: Fugro Chance Photo: Fugro Chance

Fugro Chance Inc. provided 3D acoustic metrology on a large 36-inch diameter spool piece, despite environmental and logistical challenges. The highly accurate metrology was performed from a platform in Enlace Litoral Tabasco, Gulf of Mexico at a water depth of 25 meters.

Active lines from the platform created a noisy auditory environment and the shallow water depth provided additional challenges in the long baseline (LBL) acoustic operations. Once measurements were finalized, the spool piece was welded to the existing pipeline and then set back down on the seabed. With limited tolerance for such a large diameter spool piece to fit into the riser brackets, the delivery of precise measurements was crucial for on-time completion of the project.

This was one of the shallowest 3D acoustic metrology projects Fugro Chance has ever completed and the spool piece was the largest in diameter acoustically measured. The client had allotted 36 hours for completion but Fugro’s fast response time and onsite troubleshooting enabled completion within 23 hours, saving the client time and money.

fugrochance.com
 

Gulf of MexicoHarman On Time Radio
The February 2022 eMag edition of Marine Technology Reporter looks inside the world of oceanography.
Read the Magazine Sponsored by

S-MODE: Gathering Ocean Intel from Above, On and Under the Waves

Marine Technology Magazine Cover Jul 2022 -

Marine Technology Reporter is the world's largest audited subsea industry publication serving the offshore energy, subsea defense and scientific communities.

Subscribe
Marine Technology ENews subscription

Marine Technology ENews is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

Subscribe for MTR E-news